Zoeller 165-0057 High Head FlowMate Automatic Hazardous Locations DX165 Pump

• Integral float operated mechanical switch. No external control required.
  
• FM listed motor for Class 1, Division 1, Group C & D environments.
  
• Non-clogging vortex impeller design bronze class 88-8-0-4.
  
• Stainless steel rotor shaft.
  
• Durable cast construction. Cast iron cover, motor adapter and pump housing. All cast iron class 30, 30000# tensile strength.
  
• 20 ft. UL Listed 5-wire (1 PH) or 8-wire (3 PH) neoprene cord. Extra cords lengths available in 25’-35’-50’ length only. Sensor leads and power leads in one cord for easy installation.
  
• Stainless steel plate, bolts, handle, guard and float rod guide, switch arm and actuator assembly.
  
• Brass float and float rod (automatic only).
  
• Threaded conduit connection for protecting cords in extra heavy duty applications: 1½" NPT (auto).
  
• Moisture sensors prewired in motor housing (functionality requires indicator circuit in panel).
  
• Motor - 60 Hz, 3450 RPM, oil-fi lled, hermetically sealed, automatic reset thermal overload protected (3 phase requires circuit in control panel).
  
• Maximum temperature for effluent or dewatering 104°F
  (40°C).
  
• Shaft Seal - Stainless steel wetted parts, carbon and ceramic rotary face seal.
  
• Upper ball bearing and lower ball bearing running in bath of oil.
  
• Neoprene square ring seals.
  
• All models pass ¾” spherical solids.
  
• Major width 13 5/16", height 24 15/16”.
  
• On point 19½"; off point 9¾" for automatic model.
  
• 1½” NPT discharge standard, 2” and 3” NPT Flange available.
  
• 100% computerized testing and 100% tested submerged in water.
  
• Corrosion resistant powder coated epoxy finish, with stainless steel screws and handle.