Zoeller 651-0005 Sewage Waste E651 Non-Auto 5 HP Submersible Pump w/4in. Horizontal Discharge

Zoeller Pump Company Sewage Waste 651-0005 E651 Nonautomatic 5 Horse Power Submersible Sump or Dewatering Pump

• 230 Volt, Single phase, 14.5 Amps
• Non-Clogging semi-open ductile iron impeller.
• Class 30 cast iron construction.
• Ductile iron semi-open impeller.
• All units are double seal for extra motor protection.
• Corrosion resistant powder coated epoxy finish.
• Stainless steel screws, washers, tag and seal assembly.
• 25 foot UL Listed power cord. Extra cord lengths available in 35 and 50 feet.
• Single phase - 230V capacitor start, capacitor run.
• Motor - 60 Hz, 1750 RPM, oil-filled, hermetically sealed with heavy duty finned motor housing for added heat dissipation.
• Continuous duty operation in submerged conditions.
• Maximum temperature for sewage or dewatering 104°F (40°C) with 1.2 service factor (1.0 service factor on Model 661).
• 416 stainless steel motor shaft.
• Tandem shaft seals - stainless steel fitted, carbon/ceramic seal faces.
• Oversized upper & lower ball bearings running in an oil bath.
• Buna-n square rings and seals used throughout.
• All models pass 2 1/2" spherical solids.
• 4" horizontal flanged discharge.
• 100% computerized tested.
• Major width 17 9/16". Height 29 1/4".
• Rail systems available for all models.
• Control panels with overload protection available.
• All single phase units require external starting capacity and relay circuits.