Zoeller 841-0019 The Shark JX841 Non-Automatic Hazardous Location Grinder Pump

• cFMus and CSA rated Class I, Division 1, Group C & D
  
• Finned Class 30 cast iron construction
  
• Corrosion resistant powder coated epoxy finish
  
• Discharge Size 1-1/4" NPT
  
• 2 HP, 60 Hz, 3450 RPM
  
• 20 ft. cord length (optional length available)
  
• Oil-filled, hermetically sealed motor with Class F insulation
  
• Hardened stainless steel cutter and disc Rockwell C55-60
  
• Bronze vortex impeller
  
• Upper and lower ball bearing construction
  
• Stainless steel screws, bolts and lifting bail
  
• Dual mechanical seals with leak detection
  
• Automatic thermal overload protection (single phase)
  
• Thermal sensor protection (three phase)
  
• Legs provide for free standing installation
  
• Preassembled systems available
  
• Threaded conduit connection on pump cap to provide protection to power cord and sensor wires

Standard Features:

• 1 1/4" NPT vertical discharge
  
• Carbon/ceramic tandem seals
  
• Thermal sensors** (O.L. on 1PH)
  
• Moisture probes**
  
• Balanced bronze impellers
  
• Stainless steel cutter and plate (R-C 55-60)
  
• Stainless steel shaft
  
• Stainless steel lifting bail
  
• Corrosion resistant powder coated epoxy paint
  
• 20 ft. power cord, 20 ft. sensor cord
  
• UL listed
  
• Options:
  
  
  
  • Extended cord lengths
    
  • Anti-siphon device

**Requires circuit in control panel to function. Reversible feature only available on X840 models.

Warning: Not for use in acidic, methanol or ethyl acetate atmospheres.