Zoeller 98-0032 BN98 Flow-Mate Non-Auto Dewatering Pump w/Cast Iron Impeller

• Cast Iron Impeller. 
  
• Corrosion resistant powder coated epoxy finish.
  
• Durable cast construction. Cast switch case, motor, pump housing and base. No sheet metal parts to rust or corrode.
  
• Castings-All cast iron class 25-30 25000 lbs. tensile strength.
  
• Stainless steel screws, guard, handle, and seal assembley.
  
• Motor-Permanent split capacitor, 60 Hz, 1725 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protection.
  
• Bearings-Upper & lower oil fed cast iron.
  
• Carbon and ceramic shaft seal.
  
• Entire unit pressure tested after assembly.
  
• Watertight neoprene ring between motor and pump housing.
  
• Maximum temperature for effluent or dewatering 130°F
  
• Passes 1/2 inch spherical solids.
  
• No screens to clog.
  
• 15ft. Variable level Float Switch.
  
• Standard cord length 15 ft. (UL Listed).
  
• 1 1/2 in. NPT Discharge (1 1/2" x 2" PVC Adapter included with BN & BE Models).
  
• On point-9 1/2"
  
• Off point-3"
  
• Major width-10 1/8"
  
• Height-12"