Zoeller 98-0050 Flow-Mate BN98 Submersible Pump w/25ft. VLFS & 25ft. Cord

• Non-clogging engineered plastic vortex impeller design.
• Cast iron impeller is available at extra cost.
• Model BN98 supplied with 1 1/2in. x 2in. adapter
• Corrosion resistant powder coated epoxy finish.
• Durable cast construction. Cast switch case, motor, pump housing and base. No sheet metal parts to rust or corrode. Castings - All cast iron class 25-30 25000# tensile strength.
• Stainless steel screws, guard, handle, arm and seal assembly.
• Motor - Permanent split capacitor, 60 Hz, 1725 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protection.
• Bearings - Upper and lower oil fed cast iron.
• Carbon and ceramic shaft seal.
• Entire unit pressure tested after assembly.
• Watertight neoprene square ring between motor and pump housing.
• Maximum temperature for effluent or dewatering 130°F - 54°C.
• Passes ½ inch spherical solids. No screens to clog.
• UL Listed 25ft. Cord. Longer cord lengths available at extra cost.
• 25ft. Variable Level Float Switch
• 1½” NPT Discharge (1½” X 2” PVC Adapter included with BN and BE Models).
• Major width - 10 1/8in. Height - 12in.
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.