Zoeller 3163-0003 230 volt, 1 Phase, 7.5 Amp, 1/2 HP, 1 1/2" discharge, automatic hi temperature submersible pump.

Available with 2" or 3" discharge at additional cost.

Specify size of discharge when ordering.

Discharges up to 3/4" spherical solids.

Dewatering.

Cast Iron Series Corrosion resistant powder coated epoxy finish.

A High Temperature submersible pump series with electrical components meeting the National Electrical Code requirements for 200° F service.

Comprehensive line of models, styles and modes.

Cord length for automatic is 20 feet, conduit length from pump to switch is 3 feet.

High Temperature liquid-tight conduit used with High Temperature cable.

High Temperature motor windings.

High Temperature Viton® gaskets.

High Temperature thermal overload protected.

All control components in contact with the water are High Temperature rated.

All models have vortex impeller design.

All models have stainless steel screws, guards, handles and control arm & seal assemblies.

Float operated mechanical switch box which is mounted on the discharge pipe above the operating level. (Switch box is not intended to come in continuous contact with 200° F water.)

Mechanical seal has NI-Resist stationary face and Viton® elastomer.

Corrosion resistant powder coated epoxy finish.

FLOAT ADJUSTMENT LEVELS
MODEL NO. MIN. "OFF" MIN. "ON" * MAX. "ON"
3161                  4 1/2"         14"          28 1/2"